Diceverse
Trench Ghoul Anointed by Diceverse, 28/32mm scale miniature, 60mm Tall, Trench Crusade Proxy
Trench Ghoul Anointed by Diceverse, 28/32mm scale miniature, 60mm Tall, Trench Crusade Proxy
Couldn't load pickup availability
Share
Trench Ghoul Anointed – Hulking Undead Meat Shield in Resin
Send your enemies running when these unliving tanks shamble onto the table. The Trench Ghoul Anointed are the unbreakable wall of decaying flesh and scavenged scrap that the Trench Ghoul hordes throw at anything that moves. Sculpted by Diceverse, these bad boys are the anvil-and-hammer of No Man's Land—half-dead, half-hell, and fully ready to eat your opponent's army for breakfast.
Why Choose Our Resin Prints?
- Industrial-Grade Printing with High-Detail PVC-Like Resin – Razor-sharp details on pro printers: crisp armor plates, rotting flesh textures, and gear that pops without visible layer lines
- Durable & Tough as Nails – High-detail PVC-like resin laughs off drops, table slams, and the occasional beer-fueled mishap—resists cracking, breaking, and chipping so your minis survive the real fight
- Modular Kit for Maximum Mayhem – Mix-and-match bodies, legs, heads, and a fat stack of weapons to build the exact abomination your warband needs
- Ready-to-Paint Out of the Box – Fully cleaned, cured, support-free—prime it and go full grimdark with rust, gore, and decay washes
- 32mm Scale Perfection – Fits right in with your Trench Crusade proxies or any grimdark skirmish setup; no fiddly scaling required
Ideal For
- Players who need an impenetrable wall of undead horror to hold the line while the rest of your horde closes in
- Wargamers running Trench Ghoul forces or anything that thrives on attrition and terror
- Hobbyists who love kitbashing grotesque, battlefield-scavenged monstrosities
- Collectors who want minis that look like they crawled out of a WW1 nightmare and won't shatter if the dice get rowdy
Product Details & Specs
What's Included
Full modular kit – assemble your custom Trench Ghoul Anointed from these components (all printed and ready for assembly):
- 4x Trench Ghoul Anointed bodies (1x Flamethrower version, 3x normal with some variation in equipment and small details)
- 7x Trench Ghoul Anointed legs (different walking / standing poses)
- 9x head and helmet variations
- 32mm Base
Weapon/Arm Options:
- Anti Material Rifle (old)
- Anti Material Rifle ("modern")
- 1h Polearm / Poleaxe
- 2h Polearm / Poleaxe
- 1h Concrete Mace
- 2h Concrete Mace
- Shield (face variation)
- Shield (no-face)
- Machine Gun (aiming)
- Machine Gun (relaxed)
- Grenade Launcher (aiming)
- Grenade Launcher (loading)
- 2h Submachine Gun
- 1h Submachine Gun
- 1h Flamethrower
- 2x empty arms (for 1h)
Key Specs
- Scale: 32mm heroic (standard infantry; stands ~45-50mm tall depending on pose, gear, and head choice)
- Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
- Finish: Unpainted, ready for priming and your favorite grimdark paint scheme
- Shipping: Worldwide from Salt Lake City, UT; tracking provided
- Designer: Diceverse (master of Trench Ghoul horrors and grimdark trench warfare minis)
- Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, Trench Crusade, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.
Pro Tip: Slap on some heavy rust effects, blood spatter, and a matte varnish to make that scavenged armor and decaying meat look like it's been rotting in No Man's Land for centuries. Hit up Diceverse's community for the nastiest paint schemes.
Level Up Your Collection Today
These aren't fragile show pieces—they're built to take punishment and dish it out. Limited stock, so grab your Anointed before the trenches claim them all.
Bundle with other Trench Ghoul releases for a horde that won't stop coming.
Artist
Designed by Diceverse – specialist in Trench Crusade-inspired minis, terrain, and unholy trench warfare goodness. Support the work and grab monthly releases here:
- MyMiniFactory Profile
- Patreon (monthly Trench minis, terrain, Tribes access, subscriber votes)
- Cults3D Profile
- Discord: Access via Patreon/Tribes subscription (for community, tips, and support)
Size
This Trench Ghoul Anointed miniature is built to 32mm scale, standing approximately 45-50mm tall (eye level/height varies slightly with pose, gear, and head choice; standard infantry height for the Trench Ghoul range). Models over 50mm in any dimension are often hollowed internally for better print quality, reduced weight, and more affordable pricing—ensuring they stay tough without sacrificing detail.
Quality
We offer 2 different level of quality for the Resin Printed minis. Some models only have 2 of the 3 options available based on the design and detail of the model.
Tabletop: Printed with a highly flexible resin at 50 microns and anti-aliasing. We use a high detail yet very robust resin to make sure your models are parade ready but won’t shatter like glass when they fall or get knocked over. This is the perfect compromise for models that you’re actually going to be playing with but still want to look like 1 million bucks at your local game.
Display: Printed with high detail resin at 25 microns. We also use the most advanced anti-aliasing algorithms available for maximum detail and smoothest surfaces. These are absolutely the best quality out there; every detail is crisp and precise and takes full advantage of our 14k printers. To be honest though it’s really hard to tell the difference between 25 and 50 microns without a magnifying glass. I would only suggest this quality for display or painting contests when quality means everything. These are also much for fragile that our tabletop models and I wouldn’t suggest playing or transporting these models often. The display quality really shines on the 100mm and larger models where you can really see every tiny detail the artist included. If a model is not available in display quality and you would like to get one for a diorama or display piece let me know.
Printing
We pre-print every model that we sell so we know what problems to look for and make sure you get the perfect miniature. All our models are printed on a 14K printer and have an XY resolution of 16x24 microns making them some of the highest detail models that can be made today.
Processing
All our models are post processed and the supports are removed before washing and curing. When you receive your model there could still be some micro supports (they look like wispy hairs) and there will be some small marks from the supports. For a high-quality paint job, we suggest cutting off any raised areas or support scars and lightly sanding the model just like you would do with a molded mini.
We do our best to make sure that every model out the door looks as good as possible and if there is any major scarring or problem, we’ll reprint it. In addition, any model that is multipart will be shipped unassembled and will need to be glued together by you. Any super glue works great for this but don’t use plastic cement as it will not melt the resin.
Bases
Some of the larger models include bases, sometimes including scenery or ground cover or other items like walls, etc. These will be shipped with the base the artist intended. For all other models we will include one of your magnetic bases in the appropriate size. These bases are printed from PLA and come with a 10mm high strength magnet that can be glued into them. These are great for transportation or holding them to a painting stand. These bases are also available in the store.
Shipping
All our models are made to order and will be put in the print que as soon as your order is received. This can take anywhere from 5-7 days depending on backlog. As soon as they are printed, cleaned and cured they ship and should arrive at your door a few days after that. We pack the models as well as possible but they can be damaged in shipping, especially long skinny items like spears, this is why we don’t pre-assemble. If you cannot glue your model back together, let me know and we can replace any broken parts.
Trench Ghoul Anointed – Hulking Undead Meat Shield in Resin
Send your enemies running when these unliving tanks shamble onto the table. The Trench Ghoul Anointed are the unbreakable wall of decaying flesh and scavenged scrap that the Trench Ghoul hordes throw at anything that moves. Sculpted by Diceverse, these bad boys are the anvil-and-hammer of No Man's Land—half-dead, half-hell, and fully ready to eat your opponent's army for breakfast.
Why Choose Our Resin Prints?
- Industrial-Grade Printing with High-Detail PVC-Like Resin – Razor-sharp details on pro printers: crisp armor plates, rotting flesh textures, and gear that pops without visible layer lines
- Durable & Tough as Nails – High-detail PVC-like resin laughs off drops, table slams, and the occasional beer-fueled mishap—resists cracking, breaking, and chipping so your minis survive the real fight
- Modular Kit for Maximum Mayhem – Mix-and-match bodies, legs, heads, and a fat stack of weapons to build the exact abomination your warband needs
- Ready-to-Paint Out of the Box – Fully cleaned, cured, support-free—prime it and go full grimdark with rust, gore, and decay washes
- 32mm Scale Perfection – Fits right in with your Trench Crusade proxies or any grimdark skirmish setup; no fiddly scaling required
Ideal For
- Players who need an impenetrable wall of undead horror to hold the line while the rest of your horde closes in
- Wargamers running Trench Ghoul forces or anything that thrives on attrition and terror
- Hobbyists who love kitbashing grotesque, battlefield-scavenged monstrosities
- Collectors who want minis that look like they crawled out of a WW1 nightmare and won't shatter if the dice get rowdy
Product Details & Specs
What's Included
Full modular kit – assemble your custom Trench Ghoul Anointed from these components (all printed and ready for assembly):
- 4x Trench Ghoul Anointed bodies (1x Flamethrower version, 3x normal with some variation in equipment and small details)
- 7x Trench Ghoul Anointed legs (different walking / standing poses)
- 9x head and helmet variations
- 32mm Base
Weapon/Arm Options:
- Anti Material Rifle (old)
- Anti Material Rifle ("modern")
- 1h Polearm / Poleaxe
- 2h Polearm / Poleaxe
- 1h Concrete Mace
- 2h Concrete Mace
- Shield (face variation)
- Shield (no-face)
- Machine Gun (aiming)
- Machine Gun (relaxed)
- Grenade Launcher (aiming)
- Grenade Launcher (loading)
- 2h Submachine Gun
- 1h Submachine Gun
- 1h Flamethrower
- 2x empty arms (for 1h)
Key Specs
- Scale: 32mm heroic (standard infantry; stands ~45-50mm tall depending on pose, gear, and head choice)
- Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
- Finish: Unpainted, ready for priming and your favorite grimdark paint scheme
- Shipping: Worldwide from Salt Lake City, UT; tracking provided
- Designer: Diceverse (master of Trench Ghoul horrors and grimdark trench warfare minis)
- Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, Trench Crusade, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.
Pro Tip: Slap on some heavy rust effects, blood spatter, and a matte varnish to make that scavenged armor and decaying meat look like it's been rotting in No Man's Land for centuries. Hit up Diceverse's community for the nastiest paint schemes.
Level Up Your Collection Today
These aren't fragile show pieces—they're built to take punishment and dish it out. Limited stock, so grab your Anointed before the trenches claim them all.
Bundle with other Trench Ghoul releases for a horde that won't stop coming.
Artist
Designed by Diceverse – specialist in Trench Crusade-inspired minis, terrain, and unholy trench warfare goodness. Support the work and grab monthly releases here:
- MyMiniFactory Profile
- Patreon (monthly Trench minis, terrain, Tribes access, subscriber votes)
- Cults3D Profile
- Discord: Access via Patreon/Tribes subscription (for community, tips, and support)
Size
This Trench Ghoul Anointed miniature is built to 32mm scale, standing approximately 45-50mm tall (eye level/height varies slightly with pose, gear, and head choice; standard infantry height for the Trench Ghoul range). Models over 50mm in any dimension are often hollowed internally for better print quality, reduced weight, and more affordable pricing—ensuring they stay tough without sacrificing detail.
Quality
We offer 2 different level of quality for the Resin Printed minis. Some models only have 2 of the 3 options available based on the design and detail of the model.
Tabletop: Printed with a highly flexible resin at 50 microns and anti-aliasing. We use a high detail yet very robust resin to make sure your models are parade ready but won’t shatter like glass when they fall or get knocked over. This is the perfect compromise for models that you’re actually going to be playing with but still want to look like 1 million bucks at your local game.
Display: Printed with high detail resin at 25 microns. We also use the most advanced anti-aliasing algorithms available for maximum detail and smoothest surfaces. These are absolutely the best quality out there; every detail is crisp and precise and takes full advantage of our 14k printers. To be honest though it’s really hard to tell the difference between 25 and 50 microns without a magnifying glass. I would only suggest this quality for display or painting contests when quality means everything. These are also much for fragile that our tabletop models and I wouldn’t suggest playing or transporting these models often. The display quality really shines on the 100mm and larger models where you can really see every tiny detail the artist included. If a model is not available in display quality and you would like to get one for a diorama or display piece let me know.
Printing
We pre-print every model that we sell so we know what problems to look for and make sure you get the perfect miniature. All our models are printed on a 14K printer and have an XY resolution of 16x24 microns making them some of the highest detail models that can be made today.
Processing
All our models are post processed and the supports are removed before washing and curing. When you receive your model there could still be some micro supports (they look like wispy hairs) and there will be some small marks from the supports. For a high-quality paint job, we suggest cutting off any raised areas or support scars and lightly sanding the model just like you would do with a molded mini.
We do our best to make sure that every model out the door looks as good as possible and if there is any major scarring or problem, we’ll reprint it. In addition, any model that is multipart will be shipped unassembled and will need to be glued together by you. Any super glue works great for this but don’t use plastic cement as it will not melt the resin.
Bases
Some of the larger models include bases, sometimes including scenery or ground cover or other items like walls, etc. These will be shipped with the base the artist intended. For all other models we will include one of your magnetic bases in the appropriate size. These bases are printed from PLA and come with a 10mm high strength magnet that can be glued into them. These are great for transportation or holding them to a painting stand. These bases are also available in the store.
Shipping
All our models are made to order and will be put in the print que as soon as your order is received. This can take anywhere from 5-7 days depending on backlog. As soon as they are printed, cleaned and cured they ship and should arrive at your door a few days after that. We pack the models as well as possible but they can be damaged in shipping, especially long skinny items like spears, this is why we don’t pre-assemble. If you cannot glue your model back together, let me know and we can replace any broken parts.
