Sharkzerker Warrior Pack by Battle Yak | Heroic Scale Resin Printed Miniatures (3 Units, 55mm Tall)
Sharkzerker Warrior Pack by Battle Yak | Heroic Scale Resin Printed Miniatures (3 Units, 55mm Tall)
Couldn't load pickup availability
Share
Sharkzerker Warrior Pack – Three Bloodgreed Makoragh, Your Pick of Heads
Vicious makoragh warriors of the Bloodgreed frenzy, hungry for mayhem. Sharkzerker Warrior Pack by Battle Yak Miniatures is a squad of three shark warriors from the Sharkzerkers range: one lunging, one standing tall with his tail sweeping out behind him, and one bracing with his arms forward. Three bodies. Three heads for each. A pile of swappable gear.
You get one Warrior A, one Warrior B and one Warrior C. For each of them you choose head variant 1, 2 or 3 using the options on this page. Mix and match: A2, B1 and C3 is fine. The body and pose stay the same; only the head changes. The close-up images show all nine heads side by side.
The kit includes three Makoragh warrior sculpts, each with 3 variant heads, modular gear (hands and an arsenal of weaponry), and a detailed custom base. We print the whole kit, including three 50 mm bases, one per warrior. About 49–58 mm from the soles to the top of the head crest, depending on the body. Squad of 3. Tabletop Quality.
Choose Your Heads
- Warrior A – crouched mid-lunge, both arms flung wide. About 49 mm tall and about 76 mm from snout to tail
- Warrior B – upright, arms low and ready, shark tail sweeping out to one side. About 57 mm tall
- Warrior C – upright and braced, both arms forward. About 54 mm tall
- Variant 1 – a clean, snarling face
- Variant 2 – an X-shaped scar across the snout
- Variant 3 – a heavily scarred face
Eight Shoulder Pads
Eight pauldrons. One per shoulder, mix as you like. Every one of them is in the kit:
- Planks – riveted planks lashed with rope (shown on the turntable)
- Spikes – spiked crest with curved horns on the rope arch
- Shark jaw – open toothed shark jaw over a woven net
- Big jaw – larger fanged jaw over a woven basket
- Netting – woven netting dome on the rope arch
- Netting hooks – woven dome with claw hooks
- Wheel – knobbed horseshoe yoke, like a ship's wheel
- Base pad – plain dome with the same rope arch, if you want the shoulder quiet
Ten Weapons, Plus the Hands
The warriors have no hands of their own: each wrist ends in a rope cuff with a socket, and the hands and weapons plug into it. That gives you nine one-handed weapons, the harpoon hand, and two spare hands. Every hand, and every weapon with a built-in fist, is a left hand. There is no separate right-hand sculpt. Mirror a part in the slicer if you want it on the right arm. We can mirror one for you on request.
- Anchor – spiked crescent anchor, hanging chain, rope-wrapped grip
- Axe – broad jagged axe head, rope grip, and a wrist cord
- Flail – spiked ball on a chain, rope grip
- Harpoon – long barbed harpoon, rope along the shaft
- Harpoon hook – long shaft with a hooked head and a serrated blade
- Hook hand – spiked hook rising off a fist, with the wrist socket built in
- Mace – rope-bound club
- Punch claw – leaf-shaped claw blade locked in a fist
- Sword – serrated blade with a knuckle guard, gripped in a fist (shown on the turntable)
- Harpoon hand – barbed harpoon head on a rope-wrapped grip that plugs into the wrist
- Open hand – left hand, claws out, for an empty grip or a weapon you glue in
- Fist – left fist. Mirror it if it belongs on the right arm
Why Choose Our Resin Prints?
- Industrial-Grade Printing with High-Detail PVC-Like Resin – Fins, rope, teeth, scars, and weapon edges with virtually invisible layer lines
- Durable & Tough as Nails – High-detail PVC-like resin resists cracking, breaking, and drop damage
- Build options – 3 bodies, 3 heads each, 8 pauldrons, 10 weapons, open hand and fist. Left hands as supplied; we can mirror a right hand on request
- Three printed 50 mm bases included – Plank deck, debris, and the sculpted base, one under each warrior
- Ready-to-Paint Out of the Box – Cleaned, cured, and support-stripped
Ideal For
- Fantasy warbands and RPGs that need a pack of shark brutes
- Sharkzerkers and Bloodgreed Makoragh collectors, alongside the Sharkzerker Hammerhead
- Painters who want rope, teeth, scars, wet metal, and three different silhouettes
Product Details & Specs
What's Included
- Three Sharkzerker warriors (one A, one B, one C), each with the head variant you choose, 3D resin printed in Tabletop Quality (50 microns)
- The eight pauldrons: planks, spikes, shark jaw, big jaw, netting, netting hooks, wheel, and the plain base pad
- The weapons: anchor, axe, flail, harpoon, harpoon hook, harpoon hand, hook hand, mace, punch claw, and sword
- Swappable open hand and fist (both left hands)
- Three printed 50 mm bases, one per warrior
- Secure, protective packaging to ensure safe arrival
Artist
Designed by Battle Yak Miniatures – independent studio (Sharkzerkers / Bloodgreed Makoragh, published May 2020). Support the designer here:
Size
Approximately 55 mm from the soles of the feet to the top of the head crest for the standing warriors (B about 56–58 mm, C about 54–55 mm depending on the head). Warrior A is crouched, about 49–50 mm tall and about 76 mm from snout to tail. Each stands on a printed 50 mm base. Heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.
Print Quality
Layer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, while higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.
- Tabletop Quality (50 microns) – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.
Key Specs
- Squad: 3 models (Sharkzerker Warriors A, B and C), each in your choice of head variant 1, 2 or 3, with modular pauldrons, weapons, and hands
- Scale: heroic; about 49–58 mm feet to head crest; printed 50 mm bases
- Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
- Finish: Unpainted, ready for priming and painting
- Item weight: approximately 195 g
- Processing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).
- Shipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large/custom orders).
- Designer: Battle Yak Miniatures
- Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.
Pro Tip: Paint all three as one pod: same cold grey-green hide, same rope colour, then let the scars and the weapons tell them apart. Glue the hands into the wrist cuffs before priming. If you want a weapon or fist on the right arm, ask us to mirror it – the files only include left hands.
Level Up Your Collection Today
Hand-printed with precision—print on demand from Salt Lake City. Three warriors. Nine heads to pick from. Eight shoulders. Ten weapons. Choose the faces, the rest of the arsenal is in the box.
Sharkzerker Warrior Pack – Three Bloodgreed Makoragh, Your Pick of Heads
Vicious makoragh warriors of the Bloodgreed frenzy, hungry for mayhem. Sharkzerker Warrior Pack by Battle Yak Miniatures is a squad of three shark warriors from the Sharkzerkers range: one lunging, one standing tall with his tail sweeping out behind him, and one bracing with his arms forward. Three bodies. Three heads for each. A pile of swappable gear.
You get one Warrior A, one Warrior B and one Warrior C. For each of them you choose head variant 1, 2 or 3 using the options on this page. Mix and match: A2, B1 and C3 is fine. The body and pose stay the same; only the head changes. The close-up images show all nine heads side by side.
The kit includes three Makoragh warrior sculpts, each with 3 variant heads, modular gear (hands and an arsenal of weaponry), and a detailed custom base. We print the whole kit, including three 50 mm bases, one per warrior. About 49–58 mm from the soles to the top of the head crest, depending on the body. Squad of 3. Tabletop Quality.
Choose Your Heads
- Warrior A – crouched mid-lunge, both arms flung wide. About 49 mm tall and about 76 mm from snout to tail
- Warrior B – upright, arms low and ready, shark tail sweeping out to one side. About 57 mm tall
- Warrior C – upright and braced, both arms forward. About 54 mm tall
- Variant 1 – a clean, snarling face
- Variant 2 – an X-shaped scar across the snout
- Variant 3 – a heavily scarred face
Eight Shoulder Pads
Eight pauldrons. One per shoulder, mix as you like. Every one of them is in the kit:
- Planks – riveted planks lashed with rope (shown on the turntable)
- Spikes – spiked crest with curved horns on the rope arch
- Shark jaw – open toothed shark jaw over a woven net
- Big jaw – larger fanged jaw over a woven basket
- Netting – woven netting dome on the rope arch
- Netting hooks – woven dome with claw hooks
- Wheel – knobbed horseshoe yoke, like a ship's wheel
- Base pad – plain dome with the same rope arch, if you want the shoulder quiet
Ten Weapons, Plus the Hands
The warriors have no hands of their own: each wrist ends in a rope cuff with a socket, and the hands and weapons plug into it. That gives you nine one-handed weapons, the harpoon hand, and two spare hands. Every hand, and every weapon with a built-in fist, is a left hand. There is no separate right-hand sculpt. Mirror a part in the slicer if you want it on the right arm. We can mirror one for you on request.
- Anchor – spiked crescent anchor, hanging chain, rope-wrapped grip
- Axe – broad jagged axe head, rope grip, and a wrist cord
- Flail – spiked ball on a chain, rope grip
- Harpoon – long barbed harpoon, rope along the shaft
- Harpoon hook – long shaft with a hooked head and a serrated blade
- Hook hand – spiked hook rising off a fist, with the wrist socket built in
- Mace – rope-bound club
- Punch claw – leaf-shaped claw blade locked in a fist
- Sword – serrated blade with a knuckle guard, gripped in a fist (shown on the turntable)
- Harpoon hand – barbed harpoon head on a rope-wrapped grip that plugs into the wrist
- Open hand – left hand, claws out, for an empty grip or a weapon you glue in
- Fist – left fist. Mirror it if it belongs on the right arm
Why Choose Our Resin Prints?
- Industrial-Grade Printing with High-Detail PVC-Like Resin – Fins, rope, teeth, scars, and weapon edges with virtually invisible layer lines
- Durable & Tough as Nails – High-detail PVC-like resin resists cracking, breaking, and drop damage
- Build options – 3 bodies, 3 heads each, 8 pauldrons, 10 weapons, open hand and fist. Left hands as supplied; we can mirror a right hand on request
- Three printed 50 mm bases included – Plank deck, debris, and the sculpted base, one under each warrior
- Ready-to-Paint Out of the Box – Cleaned, cured, and support-stripped
Ideal For
- Fantasy warbands and RPGs that need a pack of shark brutes
- Sharkzerkers and Bloodgreed Makoragh collectors, alongside the Sharkzerker Hammerhead
- Painters who want rope, teeth, scars, wet metal, and three different silhouettes
Product Details & Specs
What's Included
- Three Sharkzerker warriors (one A, one B, one C), each with the head variant you choose, 3D resin printed in Tabletop Quality (50 microns)
- The eight pauldrons: planks, spikes, shark jaw, big jaw, netting, netting hooks, wheel, and the plain base pad
- The weapons: anchor, axe, flail, harpoon, harpoon hook, harpoon hand, hook hand, mace, punch claw, and sword
- Swappable open hand and fist (both left hands)
- Three printed 50 mm bases, one per warrior
- Secure, protective packaging to ensure safe arrival
Artist
Designed by Battle Yak Miniatures – independent studio (Sharkzerkers / Bloodgreed Makoragh, published May 2020). Support the designer here:
Size
Approximately 55 mm from the soles of the feet to the top of the head crest for the standing warriors (B about 56–58 mm, C about 54–55 mm depending on the head). Warrior A is crouched, about 49–50 mm tall and about 76 mm from snout to tail. Each stands on a printed 50 mm base. Heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.
Print Quality
Layer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, while higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.
- Tabletop Quality (50 microns) – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.
Key Specs
- Squad: 3 models (Sharkzerker Warriors A, B and C), each in your choice of head variant 1, 2 or 3, with modular pauldrons, weapons, and hands
- Scale: heroic; about 49–58 mm feet to head crest; printed 50 mm bases
- Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
- Finish: Unpainted, ready for priming and painting
- Item weight: approximately 195 g
- Processing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).
- Shipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large/custom orders).
- Designer: Battle Yak Miniatures
- Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.
Pro Tip: Paint all three as one pod: same cold grey-green hide, same rope colour, then let the scars and the weapons tell them apart. Glue the hands into the wrist cuffs before priming. If you want a weapon or fist on the right arm, ask us to mirror it – the files only include left hands.
Level Up Your Collection Today
Hand-printed with precision—print on demand from Salt Lake City. Three warriors. Nine heads to pick from. Eight shoulders. Ten weapons. Choose the faces, the rest of the arsenal is in the box.
