Sharkzerker Hammerhead by Battle Yak | Heroic Scale Resin Printed Miniature (60mm Tall)
Sharkzerker Hammerhead by Battle Yak | Heroic Scale Resin Printed Miniature (60mm Tall)
Couldn't load pickup availability
Share
Sharkzerker Hammerhead – A Bloodgreed Makoragh with an Anchor and a Fistful of Options
A Sharkzerker warrior with the aspect of a hammerhead shark. Among the Bloodgreed makoragh, such warriors often rise to elite status. Sharkzerker Hammerhead by Battle Yak Miniatures is one hammerhead warrior from the Sharkzerkers range: wide-set eyes, a crest fin, rope-wrapped wrists, and a printed base under his feet. One sculpt. A pile of swappable gear.
This set includes one Hammerhead Makoragh warrior sculpt, modular gear (hands and an arsenal of weaponry), and one detailed custom base. We print the whole kit, including the 50 mm base. About 60 mm from the soles to the top of the head crest. With the anchor held out, the figure spans about 88 mm side to side. Single model. Both Tabletop and Display.
Eight Shoulder Pads
Eight pauldrons. One per shoulder, mix as you like. Every one of them is in the kit:
- Spikes – spiked crest with curved horns on the rope arch
- Shark jaw – open toothed shark jaw over a woven net
- Big jaw – larger fanged jaw over a woven basket
- Planks – riveted planks lashed with rope
- Netting – woven netting dome on the rope arch
- Netting hooks – woven dome with claw hooks
- Wheel – knobbed horseshoe yoke, like a ship's wheel
- Base pad – plain dome with the same rope arch, if you want the shoulder quiet
Ten Weapons, Plus the Hands
Ten one-handed weapons, and two spare hands. The open hand and the fist are both left hands. There is no separate right-hand sculpt. Mirror a hand in the slicer if you want it on the right arm. We can mirror one for you on request.
- Anchor – spiked crescent anchor, hanging chain, rope-wrapped grip
- Axe – broad jagged axe head, rope grip, and a wrist cord
- Flail – spiked ball on a chain, rope grip
- Harpoon – long barbed harpoon, rope along the shaft
- Harpoon hook – long shaft with a hooked head and a serrated blade
- Harpoon hand – barbed harpoon head on a rope-wrapped grip that plugs into the wrist
- Hook hand – spiked hook rising off a fist, with the wrist socket built in
- Mace – rope-bound club
- Punch claw – leaf-shaped claw blade locked in a fist
- Sword – serrated blade with a knuckle guard
- Open hand – left hand, claws out, for an empty grip or a weapon you glue in
- Fist – left fist. Mirror it if it belongs on the right arm
Why Choose Our Resin Prints?
- Industrial-Grade Printing with High-Detail PVC-Like Resin – Hammerhead crest, rope, teeth, and weapon edges with virtually invisible layer lines
- Durable & Tough as Nails – High-detail PVC-like resin resists cracking, breaking, and drop damage
- Build options – 8 pauldrons, 10 weapons, open hand and fist. Left hands as supplied; we can mirror a right hand on request
- Printed 50 mm base included – Plank deck, debris, and the sculpted base ship with the miniature
- Ready-to-Paint Out of the Box – Cleaned, cured, and support-stripped
Ideal For
- Fantasy warbands and RPGs that need a single hammerhead brute, not a whole regiment
- Sharkzerkers and Bloodgreed Makoragh collectors
- Painters who want rope, teeth, wet metal, and one loud weapon silhouette
Product Details & Specs
What's Included
- One Sharkzerker Hammerhead miniature, 3D resin printed – choose Tabletop or Display quality
- All eight pauldrons: spikes, shark jaw, big jaw, planks, netting, netting hooks, wheel, and the plain base pad
- All ten weapons: anchor, axe, flail, harpoon, harpoon hook, harpoon hand, hook hand, mace, punch claw, and sword
- Swappable open hand and fist (both left hands)
- Printed 50 mm base
- Secure, protective packaging to ensure safe arrival
Artist
Designed by Battle Yak Miniatures – independent studio (Sharkzerkers / Bloodgreed Makoragh, published May 2020). Support the designer here:
Size
Approximately 60 mm from the soles of the feet to the top of the head crest, on the printed 50 mm base. Overall width with the anchor held out is about 88 mm. Heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.
Print Quality Options
Choose the perfect resolution for your needs with our high-resolution 3D resin print options. Layer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, but longer print times and slightly reduced durability. Higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.
- Tabletop Quality (50 microns) – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.
- Display Quality (30 microns) – Premium option for ultra-fine, high-resolution 3D resin prints with superior smoothness and intricate details. Best for painting contests, dioramas, or shelf display where maximum visual impact matters most.
Key Specs
- Single model: Sharkzerker Hammerhead, with modular pauldrons, weapons, and hands
- Scale: heroic; about 60 mm feet to head crest; about 88 mm overall with the anchor; printed 50 mm base
- Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
- Finish: Unpainted, ready for priming and painting
- Item weight: approximately 108 g
- Processing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).
- Shipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large/custom orders).
- Designer: Battle Yak Miniatures
- Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.
Pro Tip: Keep the hide a cold grey-green, push a darker wash into the rope, and pick one bright edge on the weapon so the silhouette still reads from across the table. Glue the hand into the wrist cuff before priming. If you want a fist on the right arm, ask us to mirror it – the files only include left hands.
Level Up Your Collection Today
Hand-printed with precision—print on demand from Salt Lake City. One hammerhead. Eight shoulders. Ten weapons. The anchor is the loud option. The rest of the arsenal is in the box.
Sharkzerker Hammerhead – A Bloodgreed Makoragh with an Anchor and a Fistful of Options
A Sharkzerker warrior with the aspect of a hammerhead shark. Among the Bloodgreed makoragh, such warriors often rise to elite status. Sharkzerker Hammerhead by Battle Yak Miniatures is one hammerhead warrior from the Sharkzerkers range: wide-set eyes, a crest fin, rope-wrapped wrists, and a printed base under his feet. One sculpt. A pile of swappable gear.
This set includes one Hammerhead Makoragh warrior sculpt, modular gear (hands and an arsenal of weaponry), and one detailed custom base. We print the whole kit, including the 50 mm base. About 60 mm from the soles to the top of the head crest. With the anchor held out, the figure spans about 88 mm side to side. Single model. Both Tabletop and Display.
Eight Shoulder Pads
Eight pauldrons. One per shoulder, mix as you like. Every one of them is in the kit:
- Spikes – spiked crest with curved horns on the rope arch
- Shark jaw – open toothed shark jaw over a woven net
- Big jaw – larger fanged jaw over a woven basket
- Planks – riveted planks lashed with rope
- Netting – woven netting dome on the rope arch
- Netting hooks – woven dome with claw hooks
- Wheel – knobbed horseshoe yoke, like a ship's wheel
- Base pad – plain dome with the same rope arch, if you want the shoulder quiet
Ten Weapons, Plus the Hands
Ten one-handed weapons, and two spare hands. The open hand and the fist are both left hands. There is no separate right-hand sculpt. Mirror a hand in the slicer if you want it on the right arm. We can mirror one for you on request.
- Anchor – spiked crescent anchor, hanging chain, rope-wrapped grip
- Axe – broad jagged axe head, rope grip, and a wrist cord
- Flail – spiked ball on a chain, rope grip
- Harpoon – long barbed harpoon, rope along the shaft
- Harpoon hook – long shaft with a hooked head and a serrated blade
- Harpoon hand – barbed harpoon head on a rope-wrapped grip that plugs into the wrist
- Hook hand – spiked hook rising off a fist, with the wrist socket built in
- Mace – rope-bound club
- Punch claw – leaf-shaped claw blade locked in a fist
- Sword – serrated blade with a knuckle guard
- Open hand – left hand, claws out, for an empty grip or a weapon you glue in
- Fist – left fist. Mirror it if it belongs on the right arm
Why Choose Our Resin Prints?
- Industrial-Grade Printing with High-Detail PVC-Like Resin – Hammerhead crest, rope, teeth, and weapon edges with virtually invisible layer lines
- Durable & Tough as Nails – High-detail PVC-like resin resists cracking, breaking, and drop damage
- Build options – 8 pauldrons, 10 weapons, open hand and fist. Left hands as supplied; we can mirror a right hand on request
- Printed 50 mm base included – Plank deck, debris, and the sculpted base ship with the miniature
- Ready-to-Paint Out of the Box – Cleaned, cured, and support-stripped
Ideal For
- Fantasy warbands and RPGs that need a single hammerhead brute, not a whole regiment
- Sharkzerkers and Bloodgreed Makoragh collectors
- Painters who want rope, teeth, wet metal, and one loud weapon silhouette
Product Details & Specs
What's Included
- One Sharkzerker Hammerhead miniature, 3D resin printed – choose Tabletop or Display quality
- All eight pauldrons: spikes, shark jaw, big jaw, planks, netting, netting hooks, wheel, and the plain base pad
- All ten weapons: anchor, axe, flail, harpoon, harpoon hook, harpoon hand, hook hand, mace, punch claw, and sword
- Swappable open hand and fist (both left hands)
- Printed 50 mm base
- Secure, protective packaging to ensure safe arrival
Artist
Designed by Battle Yak Miniatures – independent studio (Sharkzerkers / Bloodgreed Makoragh, published May 2020). Support the designer here:
Size
Approximately 60 mm from the soles of the feet to the top of the head crest, on the printed 50 mm base. Overall width with the anchor held out is about 88 mm. Heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.
Print Quality Options
Choose the perfect resolution for your needs with our high-resolution 3D resin print options. Layer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, but longer print times and slightly reduced durability. Higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.
- Tabletop Quality (50 microns) – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.
- Display Quality (30 microns) – Premium option for ultra-fine, high-resolution 3D resin prints with superior smoothness and intricate details. Best for painting contests, dioramas, or shelf display where maximum visual impact matters most.
Key Specs
- Single model: Sharkzerker Hammerhead, with modular pauldrons, weapons, and hands
- Scale: heroic; about 60 mm feet to head crest; about 88 mm overall with the anchor; printed 50 mm base
- Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
- Finish: Unpainted, ready for priming and painting
- Item weight: approximately 108 g
- Processing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).
- Shipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large/custom orders).
- Designer: Battle Yak Miniatures
- Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.
Pro Tip: Keep the hide a cold grey-green, push a darker wash into the rope, and pick one bright edge on the weapon so the silhouette still reads from across the table. Glue the hand into the wrist cuff before priming. If you want a fist on the right arm, ask us to mirror it – the files only include left hands.
Level Up Your Collection Today
Hand-printed with precision—print on demand from Salt Lake City. One hammerhead. Eight shoulders. Ten weapons. The anchor is the loud option. The rest of the arsenal is in the box.
