Sharkzerker Banner-Bearer by Battle Yak | Heroic Scale Resin Printed Miniature (56mm Tall)
Sharkzerker Banner-Bearer by Battle Yak | Heroic Scale Resin Printed Miniature (56mm Tall)
Couldn't load pickup availability
Share
Sharkzerker Banner-Bearer – A Bloodgreed Makoragh Carrying the Frenzy's Colours
The Sharkzerkers are a brutish race of shark-like humanoids, with a love of battle and bloodshed. Also called the makoragh, this vicious warrior of the Bloodgreed frenzy is hungry for mayhem. Sharkzerker Banner-Bearer by Battle Yak Miniatures is one makoragh standard bearer from Sharkzerkers 2: Second Wave: a tall tattered banner in one fist, a jagged axe in the other, and a printed base under his feet. One sculpt. One banner, built your way.
This set includes one Makoragh Banner-Bearer modular sculpt, a modular banner with two icons, a selection of eight modular pauldrons, and one axe. We print the whole kit, including the 50 mm base. About 56 mm from the soles to the top of the head crest, and about 108 mm to the top of the banner (about 114 mm including the base). Single model. Tabletop Quality.
The Banner
The banner is the centrepiece: a ragged, rope-stitched flag hung from a crossbar, with a small pennant flying off the top of the pole. It comes two ways, and you choose the icon on the front:
- Modular banner – the pole with his gripping hand built in. The hand has a ball joint that plugs into the rope wrist cuff on his left arm, so the banner stands upright beside him (shown on the turntable)
- Standalone banner – the same banner and pole without the hand, a plain pole to use on its own
- Wheel icon – a ship's wheel ringed with skulls (shown on the turntable)
- Jaws icon – a pair of gaping shark jaws
The icon glues onto the front of the banner, over the crossbar where the pole meets the flag.
Eight Shoulder Pads
Eight pauldrons. One per shoulder, mix as you like. Every one of them is in the kit:
- Big jaw – larger fanged jaw over a woven basket (shown on the turntable)
- Shark jaw – open toothed shark jaw over a woven net
- Spikes – spiked crest with curved horns on the rope arch
- Planks – riveted planks lashed with rope
- Netting – woven netting dome on the rope arch
- Netting hooks – woven dome with claw hooks
- Wheel – knobbed horseshoe yoke, like a ship's wheel
- Base pad – plain dome with the same rope arch, if you want the shoulder quiet
One Axe
The kit comes with one weapon: the axe. A broad jagged axe head, a rope grip, and a wrist cord, held in a right fist that plugs into the socket on his right wrist. Both wrists end in rope cuffs with ball sockets, like the rest of the Sharkzerkers. The modular weapons from the other Sharkzerkers kits use the same wrist socket, so they are compatible if you already own them. They are not included with this model.
Why Choose Our Resin Prints?
- Industrial-Grade Printing with High-Detail PVC-Like Resin – Tattered cloth, rope stitching, teeth, skulls, and axe edges with virtually invisible layer lines
- Durable & Tough as Nails – High-detail PVC-like resin resists cracking, breaking, and drop damage
- Build options – Modular or standalone banner, wheel or jaws icon, 8 pauldrons, and the axe
- Printed 50 mm base included – Plank deck and debris ship with the miniature
- Ready-to-Paint Out of the Box – Cleaned, cured, and support-stripped
Ideal For
- Fantasy warbands and RPGs that need a standard bearer to lead the shark brutes
- Sharkzerkers and Bloodgreed Makoragh collectors, alongside the Sharkzerker Hammerhead and the Warrior Pack
- Painters who want a big flag to freehand, plus rope, teeth, skulls, and wet metal
Product Details & Specs
What's Included
- One Sharkzerker Banner-Bearer miniature, 3D resin printed in Tabletop Quality (50 microns)
- The banner in both versions: modular (with hand) and standalone (plain pole)
- Both banner icons: wheel and jaws
- All eight pauldrons: big jaw, shark jaw, spikes, planks, netting, netting hooks, wheel, and the plain base pad
- One axe (right fist with wrist socket)
- Printed 50 mm base
- Secure, protective packaging to ensure safe arrival
Artist
Designed by Battle Yak Miniatures – independent studio (Sharkzerkers 2: Second Wave / Bloodgreed Makoragh, published June 2021). Support the designer here:
Size
Approximately 56 mm from the soles of the feet to the top of the head crest, on the printed 50 mm base. With the modular banner fitted, about 108 mm from the soles to the top of the pennant, or about 114 mm including the base. Heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.
Print Quality
Layer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, while higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.
- Tabletop Quality (50 microns) – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.
Key Specs
- Single model: Sharkzerker Banner-Bearer, with modular banner (two icons), modular pauldrons, and one axe
- Scale: heroic; about 56 mm feet to head crest; about 108 mm to the banner top; printed 50 mm base
- Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
- Finish: Unpainted, ready for priming and painting
- Item weight: approximately 98 g
- Processing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).
- Shipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large/custom orders).
- Designer: Battle Yak Miniatures
- Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.
Pro Tip: Paint the banner off the model, then glue the icon on and plug the hand into the wrist cuff last. Keep the hide a cold grey-green and give the flag one strong colour so it reads from across the table. The pole is long and thin: handle the banner by the cloth, not the tip of the pennant.
Level Up Your Collection Today
Hand-printed with precision—print on demand from Salt Lake City. One banner-bearer. Two banners. Two icons. Eight shoulders. One axe. Raise the colours.
Sharkzerker Banner-Bearer – A Bloodgreed Makoragh Carrying the Frenzy's Colours
The Sharkzerkers are a brutish race of shark-like humanoids, with a love of battle and bloodshed. Also called the makoragh, this vicious warrior of the Bloodgreed frenzy is hungry for mayhem. Sharkzerker Banner-Bearer by Battle Yak Miniatures is one makoragh standard bearer from Sharkzerkers 2: Second Wave: a tall tattered banner in one fist, a jagged axe in the other, and a printed base under his feet. One sculpt. One banner, built your way.
This set includes one Makoragh Banner-Bearer modular sculpt, a modular banner with two icons, a selection of eight modular pauldrons, and one axe. We print the whole kit, including the 50 mm base. About 56 mm from the soles to the top of the head crest, and about 108 mm to the top of the banner (about 114 mm including the base). Single model. Tabletop Quality.
The Banner
The banner is the centrepiece: a ragged, rope-stitched flag hung from a crossbar, with a small pennant flying off the top of the pole. It comes two ways, and you choose the icon on the front:
- Modular banner – the pole with his gripping hand built in. The hand has a ball joint that plugs into the rope wrist cuff on his left arm, so the banner stands upright beside him (shown on the turntable)
- Standalone banner – the same banner and pole without the hand, a plain pole to use on its own
- Wheel icon – a ship's wheel ringed with skulls (shown on the turntable)
- Jaws icon – a pair of gaping shark jaws
The icon glues onto the front of the banner, over the crossbar where the pole meets the flag.
Eight Shoulder Pads
Eight pauldrons. One per shoulder, mix as you like. Every one of them is in the kit:
- Big jaw – larger fanged jaw over a woven basket (shown on the turntable)
- Shark jaw – open toothed shark jaw over a woven net
- Spikes – spiked crest with curved horns on the rope arch
- Planks – riveted planks lashed with rope
- Netting – woven netting dome on the rope arch
- Netting hooks – woven dome with claw hooks
- Wheel – knobbed horseshoe yoke, like a ship's wheel
- Base pad – plain dome with the same rope arch, if you want the shoulder quiet
One Axe
The kit comes with one weapon: the axe. A broad jagged axe head, a rope grip, and a wrist cord, held in a right fist that plugs into the socket on his right wrist. Both wrists end in rope cuffs with ball sockets, like the rest of the Sharkzerkers. The modular weapons from the other Sharkzerkers kits use the same wrist socket, so they are compatible if you already own them. They are not included with this model.
Why Choose Our Resin Prints?
- Industrial-Grade Printing with High-Detail PVC-Like Resin – Tattered cloth, rope stitching, teeth, skulls, and axe edges with virtually invisible layer lines
- Durable & Tough as Nails – High-detail PVC-like resin resists cracking, breaking, and drop damage
- Build options – Modular or standalone banner, wheel or jaws icon, 8 pauldrons, and the axe
- Printed 50 mm base included – Plank deck and debris ship with the miniature
- Ready-to-Paint Out of the Box – Cleaned, cured, and support-stripped
Ideal For
- Fantasy warbands and RPGs that need a standard bearer to lead the shark brutes
- Sharkzerkers and Bloodgreed Makoragh collectors, alongside the Sharkzerker Hammerhead and the Warrior Pack
- Painters who want a big flag to freehand, plus rope, teeth, skulls, and wet metal
Product Details & Specs
What's Included
- One Sharkzerker Banner-Bearer miniature, 3D resin printed in Tabletop Quality (50 microns)
- The banner in both versions: modular (with hand) and standalone (plain pole)
- Both banner icons: wheel and jaws
- All eight pauldrons: big jaw, shark jaw, spikes, planks, netting, netting hooks, wheel, and the plain base pad
- One axe (right fist with wrist socket)
- Printed 50 mm base
- Secure, protective packaging to ensure safe arrival
Artist
Designed by Battle Yak Miniatures – independent studio (Sharkzerkers 2: Second Wave / Bloodgreed Makoragh, published June 2021). Support the designer here:
Size
Approximately 56 mm from the soles of the feet to the top of the head crest, on the printed 50 mm base. With the modular banner fitted, about 108 mm from the soles to the top of the pennant, or about 114 mm including the base. Heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.
Print Quality
Layer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, while higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.
- Tabletop Quality (50 microns) – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.
Key Specs
- Single model: Sharkzerker Banner-Bearer, with modular banner (two icons), modular pauldrons, and one axe
- Scale: heroic; about 56 mm feet to head crest; about 108 mm to the banner top; printed 50 mm base
- Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
- Finish: Unpainted, ready for priming and painting
- Item weight: approximately 98 g
- Processing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).
- Shipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large/custom orders).
- Designer: Battle Yak Miniatures
- Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.
Pro Tip: Paint the banner off the model, then glue the icon on and plug the hand into the wrist cuff last. Keep the hide a cold grey-green and give the flag one strong colour so it reads from across the table. The pole is long and thin: handle the banner by the cloth, not the tip of the pennant.
Level Up Your Collection Today
Hand-printed with precision—print on demand from Salt Lake City. One banner-bearer. Two banners. Two icons. Eight shoulders. One axe. Raise the colours.
