Sharkzerker Great-Weapon Pack – Three Bloodgreed Makoragh with Two-Handed Great Weapons

The Sharkzerkers are a brutish race of shark-like humanoids, with a love of battle and bloodshed. Also called the makoragh, these vicious warriors of the Bloodgreed frenzy are hungry for mayhem. Sharkzerker Great-Weapon Pack by Battle Yak Miniatures is a squad of three makoragh from Sharkzerkers 2: Second Wave, and every one of them fights with both hands: one swinging his weapon high over his head, one striding in with it braced across his chest, one in a wide, low crouch with the blade angled down. Three warriors. Eight great weapons. Pick the one you want in each pair of fists.

You get three Sharkzerker great-weapon warriors, an arsenal of eight modular two-handed great weapons, a bonus one-handed axe, and a selection of eight modular pauldrons. We print the whole set, including three 50 mm bases, one per warrior. About 55–62 mm from the soles to the top of the head crest, depending on the pose. Squad of 3. Tabletop Quality.

Eight Two-Handed Great Weapons

The great weapons are the heart of this kit. Each one is a single piece: the long rope-wrapped haft with both of the warrior's hands already gripping it. Each hand has a ball joint on the back that plugs into the rope wrist cuff on that arm, so one weapon fits both wrists at once. The grip spacing is the same on all eight, so any great weapon can go to any of the three warriors. They run about 78–98 mm long, and every one of them is in the kit:

• Jaw blade – a long glaive blade lined with a row of shark teeth (shown on the turntable)
• Double axe – twin crescent blades with spiked, serrated edges and a studded collar
• Great axe – one broad, jagged blade edged with fin-like spikes, and a studded collar
• Anchor – a twin-fluked iron anchor on a rope-bound haft
• Hook blade – a hooked crescent axe head, its C-shaped blade ringed with teeth
• Hook harpoon – double-ended: a big hooked crescent at one end, a saw-barbed harpoon point at the other, and spikes along the haft
• Harpoon – a barbed harpoon point with a swept-back hook barb
• Spear – a long leaf-shaped spearhead studded with spikes

Bonus one-handed axe – a broad jagged axe head, a rope grip, and a wrist cord, held in a right fist that plugs into the right wrist cuff.

Three Warriors

The warriors have no hands of their own: both wrists end in rope cuffs with ball sockets, and the great weapon's hands plug in. All three swing their tails out behind them.

• Overhead – both arms raised, weapon held high above his head, ready to bring it down (shown on the turntable). About 62 mm to the head crest, more with the weapon raised
• Striding – stepping forward, weapon braced diagonally across his chest. About 60 mm
• Crouching – wide, low stance, arms forward, weapon angled down across his body. About 55 mm

Eight Shoulder Pads

Eight pauldrons. One per shoulder, mix as you like. Every one of them is in the kit:

• Netting – woven netting dome on the rope arch (shown on the turntable)
• Netting hooks – woven dome with claw hooks
• Shark jaw – open toothed shark jaw over a woven net
• Big jaw – larger fanged jaw over a woven basket
• Spikes – spiked crest with curved horns on the rope arch
• Planks – riveted planks lashed with rope
• Wheel – knobbed horseshoe yoke, like a ship's wheel
• Base pad – plain dome with the same rope arch, if you want the shoulder quiet

The Sharkzerker Banner-Bearer from the same wave is not part of this listing. He is available separately: Sharkzerker Banner-Bearer.

Why Choose Our Resin Prints?

• Industrial-Grade Printing with High-Detail PVC-Like Resin – Shark teeth, serrated blades, rope wraps, fins, and scars with virtually invisible layer lines
• Durable & Tough as Nails – High-detail PVC-like resin resists cracking, breaking, and drop damage
• Build options – 3 warriors, 8 two-handed great weapons, a one-handed axe, and 8 pauldrons
• Three printed 50 mm bases included – Plank deck and debris, one under each warrior
• Ready-to-Paint Out of the Box – Cleaned, cured, and support-stripped

Ideal For

• Fantasy warbands and RPGs that need heavy hitters for a pack of shark brutes
• Sharkzerkers and Bloodgreed Makoragh collectors, alongside the Sharkzerker Hammerhead, the Warrior Pack, and the Banner-Bearer
• Painters who want big blades, wet metal, rope, teeth, and three different silhouettes

Product Details & Specs

What's Included

• Three Sharkzerker great-weapon warriors (overhead, striding, and crouching), 3D resin printed in Tabletop Quality (50 microns)
• All eight two-handed great weapons, each with both gripping hands: jaw blade, double axe, great axe, anchor, hook blade, hook harpoon, harpoon, and spear
• One bonus one-handed axe (right fist with wrist socket)
• All eight pauldrons: netting, netting hooks, shark jaw, big jaw, spikes, planks, wheel, and the plain base pad
• Three printed 50 mm bases, one per warrior
• Secure, protective packaging to ensure safe arrival

Artist

Designed by Battle Yak Miniatures – independent studio (Sharkzerkers 2: Second Wave / Bloodgreed Makoragh, published June 2021). Support the designer here:

• MyMiniFactory Profile
• Sharkzerker with Great-Weapon Pack on MyMiniFactory
• Battle Yak Tribe
• Patreon

Size

Approximately 60 mm from the soles of the feet to the top of the head crest for a typical warrior: the overhead warrior about 62 mm, the striding warrior about 60 mm, and the crouching warrior about 55 mm. With the jaw blade raised as on the turntable, the overhead warrior is about 79 mm from the soles to the top of the blade. The great weapons are about 78–98 mm long. Each stands on a printed 50 mm base. Heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.

Print Quality

Layer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, while higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.

• Tabletop Quality (50 microns) – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.

Key Specs

• Squad: 3 models (Sharkzerker great-weapon warriors), with 8 modular two-handed great weapons, a one-handed axe, and 8 modular pauldrons
• Scale: heroic; about 55–62 mm feet to head crest; printed 50 mm bases
• Material: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage
• Finish: Unpainted, ready for priming and painting
• Item weight: approximately 265 g
• Processing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).
• Shipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large/custom orders).
• Designer: Battle Yak Miniatures
• Compatibility Note: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons & Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.

Pro Tip: Paint each great weapon off the model, then plug both hands into the wrist cuffs at once and glue. Dry-fit first: the two ball joints set the angle together. Keep the hide a cold grey-green across all three and let the blades carry the colour. The hafts are long and thin: handle them by the hands, not the tips.

Level Up Your Collection Today

Hand-printed with precision—print on demand from Salt Lake City. Three warriors. Eight great weapons. A spare axe. Eight shoulders. Two hands on every haft.