{"product_id":"sharkzerker-banner-bearer-battle-yak","title":"Sharkzerker Banner-Bearer by Battle Yak | Heroic Scale Resin Printed Miniature (56mm Tall)","description":"\u003ch2\u003eSharkzerker Banner-Bearer – A Bloodgreed Makoragh Carrying the Frenzy's Colours\u003c\/h2\u003e\n\u003cp\u003eThe Sharkzerkers are a brutish race of shark-like humanoids, with a love of battle and bloodshed. Also called the makoragh, this vicious warrior of the Bloodgreed frenzy is hungry for mayhem. \u003cstrong\u003eSharkzerker Banner-Bearer\u003c\/strong\u003e by Battle Yak Miniatures is one makoragh standard bearer from Sharkzerkers 2: Second Wave: a tall tattered banner in one fist, a jagged axe in the other, and a printed base under his feet. One sculpt. One banner, built your way.\u003c\/p\u003e\n\u003cp\u003eThis set includes one Makoragh Banner-Bearer modular sculpt, a modular banner with two icons, a selection of eight modular pauldrons, and one axe. We print the whole kit, including the \u003cstrong\u003e50 mm base\u003c\/strong\u003e. About \u003cstrong\u003e56 mm from the soles to the top of the head crest\u003c\/strong\u003e, and about \u003cstrong\u003e108 mm to the top of the banner\u003c\/strong\u003e (about 114 mm including the base). Single model. Tabletop Quality.\u003c\/p\u003e\n\u003ch3\u003eThe Banner\u003c\/h3\u003e\n\u003cp\u003eThe banner is the centrepiece: a ragged, rope-stitched flag hung from a crossbar, with a small pennant flying off the top of the pole. It comes two ways, and you choose the icon on the front:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular banner\u003c\/strong\u003e – the pole with his gripping hand built in. The hand has a ball joint that plugs into the rope wrist cuff on his left arm, so the banner stands upright beside him (shown on the turntable)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandalone banner\u003c\/strong\u003e – the same banner and pole without the hand, a plain pole to use on its own\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel icon\u003c\/strong\u003e – a ship's wheel ringed with skulls (shown on the turntable)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaws icon\u003c\/strong\u003e – a pair of gaping shark jaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe icon glues onto the front of the banner, over the crossbar where the pole meets the flag.\u003c\/p\u003e\n\u003ch3\u003eEight Shoulder Pads\u003c\/h3\u003e\n\u003cp\u003eEight pauldrons. One per shoulder, mix as you like. Every one of them is in the kit:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBig jaw\u003c\/strong\u003e – larger fanged jaw over a woven basket (shown on the turntable)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShark jaw\u003c\/strong\u003e – open toothed shark jaw over a woven net\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpikes\u003c\/strong\u003e – spiked crest with curved horns on the rope arch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlanks\u003c\/strong\u003e – riveted planks lashed with rope\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNetting\u003c\/strong\u003e – woven netting dome on the rope arch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNetting hooks\u003c\/strong\u003e – woven dome with claw hooks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel\u003c\/strong\u003e – knobbed horseshoe yoke, like a ship's wheel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase pad\u003c\/strong\u003e – plain dome with the same rope arch, if you want the shoulder quiet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOne Axe\u003c\/h3\u003e\n\u003cp\u003eThe kit comes with \u003cstrong\u003eone weapon: the axe\u003c\/strong\u003e. A broad jagged axe head, a rope grip, and a wrist cord, held in a right fist that plugs into the socket on his right wrist. Both wrists end in rope cuffs with ball sockets, like the rest of the Sharkzerkers. The modular weapons from the other Sharkzerkers kits use the same wrist socket, so they are compatible if you already own them. They are not included with this model.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Our Resin Prints?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustrial-Grade Printing with High-Detail PVC-Like Resin\u003c\/strong\u003e – Tattered cloth, rope stitching, teeth, skulls, and axe edges with virtually invisible layer lines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable \u0026amp; Tough as Nails\u003c\/strong\u003e – High-detail PVC-like resin resists cracking, breaking, and drop damage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuild options\u003c\/strong\u003e – Modular or standalone banner, wheel or jaws icon, 8 pauldrons, and the axe\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrinted 50 mm base included\u003c\/strong\u003e – Plank deck and debris ship with the miniature\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReady-to-Paint Out of the Box\u003c\/strong\u003e – Cleaned, cured, and support-stripped\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFantasy warbands and RPGs that need a standard bearer to lead the shark brutes\u003c\/li\u003e\n  \u003cli\u003eSharkzerkers and Bloodgreed Makoragh collectors, alongside the Sharkzerker Hammerhead and the Warrior Pack\u003c\/li\u003e\n  \u003cli\u003ePainters who want a big flag to freehand, plus rope, teeth, skulls, and wet metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details \u0026amp; Specs\u003c\/h2\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Sharkzerker Banner-Bearer miniature, 3D resin printed in Tabletop Quality (50 microns)\u003c\/li\u003e\n  \u003cli\u003eThe banner in both versions: modular (with hand) and standalone (plain pole)\u003c\/li\u003e\n  \u003cli\u003eBoth banner icons: wheel and jaws\u003c\/li\u003e\n  \u003cli\u003eAll eight pauldrons: big jaw, shark jaw, spikes, planks, netting, netting hooks, wheel, and the plain base pad\u003c\/li\u003e\n  \u003cli\u003eOne axe (right fist with wrist socket)\u003c\/li\u003e\n  \u003cli\u003ePrinted 50 mm base\u003c\/li\u003e\n  \u003cli\u003eSecure, protective packaging to ensure safe arrival\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eArtist\u003c\/h3\u003e\n\u003cp\u003eDesigned by Battle Yak Miniatures – independent studio (Sharkzerkers 2: Second Wave \/ Bloodgreed Makoragh, published June 2021). Support the designer here:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.myminifactory.com\/users\/BattleYak\"\u003eMyMiniFactory Profile\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.myminifactory.com\/object\/3d-print-sharkzerker-banner-bearer-172000\"\u003eSharkzerker Banner-Bearer on MyMiniFactory\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.myminifactory.com\/users\/BattleYak?show=tribe\"\u003eBattle Yak Tribe\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.patreon.com\/BattleYakMiniatures\"\u003ePatreon\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSize\u003c\/h3\u003e\n\u003cp\u003eApproximately 56 mm from the soles of the feet to the top of the head crest, on the printed 50 mm base. With the modular banner fitted, about 108 mm from the soles to the top of the pennant, or about 114 mm including the base. Heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.\u003c\/p\u003e\n\u003ch3\u003ePrint Quality\u003c\/h3\u003e\n\u003cp\u003eLayer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, while higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTabletop Quality (50 microns)\u003c\/strong\u003e – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle model: Sharkzerker Banner-Bearer, with modular banner (two icons), modular pauldrons, and one axe\u003c\/li\u003e\n  \u003cli\u003eScale: heroic; about 56 mm feet to head crest; about 108 mm to the banner top; printed 50 mm base\u003c\/li\u003e\n  \u003cli\u003eMaterial: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage\u003c\/li\u003e\n  \u003cli\u003eFinish: Unpainted, ready for priming and painting\u003c\/li\u003e\n  \u003cli\u003eItem weight: approximately 98 g\u003c\/li\u003e\n  \u003cli\u003eProcessing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).\u003c\/li\u003e\n  \u003cli\u003eShipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large\/custom orders).\u003c\/li\u003e\n  \u003cli\u003eDesigner: Battle Yak Miniatures\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility Note\u003c\/strong\u003e: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons \u0026amp; Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Paint the banner off the model, then glue the icon on and plug the hand into the wrist cuff last. Keep the hide a cold grey-green and give the flag one strong colour so it reads from across the table. The pole is long and thin: handle the banner by the cloth, not the tip of the pennant.\u003c\/p\u003e\n\u003ch2\u003eLevel Up Your Collection Today\u003c\/h2\u003e\n\u003cp\u003eHand-printed with precision—print on demand from Salt Lake City. One banner-bearer. Two banners. Two icons. Eight shoulders. One axe. Raise the colours.\u003c\/p\u003e\n","brand":"Mega Diamonds \u0026 Schwartzreiter Mini Forge","offers":[{"title":"Tabletop Quality (50 microns)","offer_id":50706205049018,"sku":"RES-SHA-TAB-943","price":36.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/7741\/2538\/files\/sharkzerker-banner-bearer-01-main.jpg?v=1791588745","url":"https:\/\/schwartzreiter.com\/products\/sharkzerker-banner-bearer-battle-yak","provider":"Schwartz Reiter Mini Forge (Mega Diamonds LLC)","version":"1.0","type":"link"}