{"product_id":"flimtrax-rn-estudio","title":"Flimtrax by RN Estudio | Heroic Scale Resin Printed Miniature (91mm Tall)","description":"\u003ch2\u003eFlimtrax – A Rearing Wyvern-Dragon with Wings Thrown Wide\u003c\/h2\u003e\n\u003cp\u003eFlimtrax doesn't land quietly. This winged dragon by RN Estudio rears up on powerful hind legs, wings spread to full span, jaws open in a roar and taloned forelimbs raised to strike. Every surface is worked: overlapping armoured scales down the back and tail, broad ribbed plates over the chest and belly, a crown of swept-back horns, ridges of spikes along the tail and legs, and great leathery wings stretched between clawed finger-bones.\u003c\/p\u003e\n\u003cp\u003eIt prints as a body plus separate left and right wings that glue into place, and it comes with its own \u003cstrong\u003eprinted sculpted round base\u003c\/strong\u003e (about 60 mm, with rocky, broken-flagstone ground). It stands about 91 mm from feet to horn tips, and the raised wings take it to roughly 117 mm tall and 156 mm across. That's a centrepiece-sized monster for a 32 mm heroic table: a boss dragon for your RPG, a terror for your fantasy warband, or a showpiece for the painting shelf.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Our Resin Prints?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustrial-Grade Printing with High-Detail PVC-Like Resin\u003c\/strong\u003e – Crisp scale texture, membrane veining, belly plates and needle-sharp horns and talons, with virtually invisible layer lines\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable \u0026amp; Tough as Nails\u003c\/strong\u003e – High-detail PVC-like resin resists cracking, breaking, and drop damage. Big monsters with big wings take knocks; this resin can take them too.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-part kit, ready to assemble\u003c\/strong\u003e – Body, left wing and right wing (printed from the unsupported files); the wings glue onto the shoulders\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrinted base included\u003c\/strong\u003e – Sculpted round base with rocky flagstone ground, made for this model\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReady-to-Paint Out of the Box\u003c\/strong\u003e – Cleaned, cured, and support-stripped\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFantasy RPGs and campaigns that need a dragon, wyvern or winged boss monster\u003c\/li\u003e\n  \u003cli\u003eFantasy wargames and skirmish games that need a large flying monster or an army centrepiece\u003c\/li\u003e\n  \u003cli\u003ePainters who want big wing membranes to blend, layered scales to drybrush, and ivory horns and claws to pick out\u003c\/li\u003e\n  \u003cli\u003eDisplay shelves and dioramas – the spread-wing pose reads from every angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details \u0026amp; Specs\u003c\/h2\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Flimtrax dragon miniature (3 parts: body, left wing, right wing), 3D resin printed – choose Tabletop or Display quality\u003c\/li\u003e\n  \u003cli\u003eOne printed sculpted round base (about 60 mm)\u003c\/li\u003e\n  \u003cli\u003eSecure, protective packaging to ensure safe arrival\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eArtist\u003c\/h3\u003e\n\u003cp\u003eDesigned by RN Estudio – independent studio (MyMiniFactory release, 2026). Support the designer here:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.myminifactory.com\/users\/rnestudio\"\u003eMyMiniFactory Profile\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.myminifactory.com\/object\/3d-print-pre-supported-flimtrax-854745\"\u003eFlimtrax on MyMiniFactory\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSize\u003c\/h3\u003e\n\u003cp\u003eApproximately 91 mm from feet to horn tips (typical body height). Overall size with the wings raised is about 117 mm tall, 156 mm wingspan and 87 mm deep, without the base. Standing on the included ~60 mm round base (about 8.5 mm thick), it's about 121 mm tall overall. 32 mm heroic scale. Models over 50 mm may be hollowed internally for print quality, reduced weight, and more affordable pricing.\u003c\/p\u003e\n\u003ch3\u003ePrint Quality Options\u003c\/h3\u003e\n\u003cp\u003eChoose the perfect resolution for your needs with our high-resolution 3D resin print options. Layer height determines detail and finish: lower microns mean thinner layers for smoother surfaces and finer details, but longer print times and slightly reduced durability. Higher microns balance speed, strength, and cost while maintaining excellent quality for gameplay.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTabletop Quality (50 microns)\u003c\/strong\u003e – Ideal for durable, high-resolution 3D resin prints perfect for wargaming and RPGs. Offers sharp details, robust flexibility, and minimal visible layers—great for minis that see real table action without fragility.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisplay Quality (30 microns)\u003c\/strong\u003e – Premium option for ultra-fine, high-resolution 3D resin prints with superior smoothness and intricate details. Best for painting contests, dioramas, or shelf display where maximum visual impact matters most.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle model: Flimtrax (body + 2 wings) with printed round base\u003c\/li\u003e\n  \u003cli\u003eScale: 32 mm heroic; about 91 mm feet to horn tips; ~117 mm tall and 156 mm wingspan overall (wings raised, without base)\u003c\/li\u003e\n  \u003cli\u003eMaterial: High-detail PVC-like resin printed on industrial-grade printers for minimal layer lines and resistance to cracking, breaking, and drop damage\u003c\/li\u003e\n  \u003cli\u003eFinish: Unpainted, ready for priming and painting\u003c\/li\u003e\n  \u003cli\u003eItem weight: approximately 168 g\u003c\/li\u003e\n  \u003cli\u003eProcessing: We remove around 95% of supports during post-print cleanup, but some may remain to protect delicate parts during shipping or prevent model damage. Models will require sanding (for any minor marks), assembly (if multipart), and painting by the customer—use super glue for assembly (not plastic cement).\u003c\/li\u003e\n  \u003cli\u003eShipping: Print on demand. Ships worldwide from Salt Lake City, UT; tracking provided. Typical printing and processing time is 4 weeks (made to order; may vary slightly for large\/custom orders).\u003c\/li\u003e\n  \u003cli\u003eDesigner: RN Estudio\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility Note\u003c\/strong\u003e: This miniature is an independent artist creation. It is not designed, produced, endorsed, licensed, or affiliated with Games Workshop, Wizards of the Coast, Dungeons \u0026amp; Dragons, or any other third-party company. It is sold for personal, non-commercial use only and is fully compliant with applicable US copyright and trademark laws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Paint the wings off the model. Prime and basecoat the body and both wings separately, blend the membranes from a dark edge to a warmer centre, then glue the wings on and touch up the shoulder joints. Drybrush the scales, keep the belly plates a lighter tone, and finish the horns and talons in bone ivory so they stand out.\u003c\/p\u003e\n\u003ch2\u003eLevel Up Your Collection Today\u003c\/h2\u003e\n\u003cp\u003eHand-printed with precision—print on demand from Salt Lake City. Put Flimtrax on the table and let your players hear the wings before they see it.\u003c\/p\u003e\n","brand":"Mega Diamonds \u0026 Schwartzreiter Mini Forge","offers":[{"title":"Tabletop Quality (50 microns)","offer_id":50711090987194,"sku":"RES-FLI-TAB-787","price":54.75,"currency_code":"USD","in_stock":true},{"title":"Display Quality (30 microns)","offer_id":50711092822202,"sku":"RES-FLI-DIS-964","price":72.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/7741\/2538\/files\/flimtrax-01-main.jpg?v=1791685534","url":"https:\/\/schwartzreiter.com\/products\/flimtrax-rn-estudio","provider":"Schwartz Reiter Mini Forge (Mega Diamonds LLC)","version":"1.0","type":"link"}